Wireless Speakers System

Best Wireless Speakers System Deals

Posts Tagged ‘Powered’

PYLE PWMA230 200W VHF Wireless Battery Powered PA System

Monday, May 31st, 2010

PYLE PWMA230 200W VHF Wireless Battery Powered PA System

Unit Powered by Internal Rechargeable Battery Pack2 Mic, 1 Guitar, and 1 Audio 1/4” Inputs Echo, Bass and Treble Controls RF, Charge, Low Batt & Power LED Indicators Dynamic Wireless Mic w/ 3 Position Power Switch & LED Operation range: 100 ft. 8” Full range Speaker 100W RMS, 200W Peak Power Unit Battery Life: Approx. 5 Hours Mic Battery Life: Approx. 45 Hours Ported Enclosure for Increased Bass Response Telescoping Handle & Caster Wheels 35mm Speaker Stand Mount Operating Frequency: 177-205 MHz 110/220 Voltage Switchable Weight: 26.5 lbs. Dimensions: 14.7”L x 10.6”W x 11.2”H

(more…)

AmpliVox Sound Systems S1204 Satellite Wireless Powered Dual Speaker

Thursday, December 24th, 2009

AmpliVox Sound Systems S1204 Satellite Wireless Powered Dual Speaker

AmpliVox Sound Systems S1204 Expand your S1204-70 Remote Speaker System effortlessly without stringing cables! The S1204’s built-in 50 watt amplifier and receiver plus dual Jensen 6″ x 8″ speakers make it easy. Build a multi-point wireless powered speaker network within the 300 ft. reception range.Power it with 10 alkaline D-cell batteries, S1460 Universal AC Adapter/Recharger or rechargeable NiCad Battery Pack, which requires S1460. (All sold separately). Features: -Adds additional coverage when you already have the S1204-70. -Place up to 300 feet away from sound system. -Power the system with 10 alkaline D-cell batteries, S1460 Universal AC Adapter/Recharger or rechargeable NiCad Battery Pack, which requires S1460. (All sold separately). -Exclusive, built-in AmpliVox 50 watt amplifier with built-in 900 MHz wireless receiver. -Overall Dimensions: 11″ H x 13.5″ W x 4.5″ D. -6 Year Warranty. Specifications

(more…)

Azden APS-VR Wireless VHF Plug-in Module for APS Powered Speaker Speaker System (E2 – 195.425MHz)

Tuesday, October 13th, 2009

Azden APS-VR Wireless VHF Plug-in Module for APS Powered Speaker Speaker System (E2 - 195.425MHz)

APS-VR VHF Module for APS Speaker

A single-channel VHF plug-in module (pre-programmed / E2 – frequency: 195.425MHz) for the APS Powered Speaker System. Simply plug into the slot on the rear of your APS powered speaker.

Receiver Technical Specs:
Frequency: 195.425MHz
Frequency Response: 40Hz – 18kHz
S/N Ratio: better than 95dB (A weighted)
Operating Temperature Range: 0 – 45 C (32 – 113 F)
Operating Range: approx 100m (ideal-line of sight)
Oscillator: Crystal Controlled
Receiver Type: Super Heterodyne
Image Rejection: Better than 60dB
RF Sensitivity: -95dBm @ 50dB S/N
Audio Output Impedance: 2.2k ohms
Power Requirements: 10 – 16VDC

(more…)

  • Similar Wireless Speakers Systems

  • Recent Wireless Speakers Systems Posts

  • Wireless Speakers Systems

  • © 2009. All Rights Reserved | http://www.wirelessspeakerssystem.net